The Android app for remote play, Xbox Game Streaming, was released quite a while ago, and Microsoft is all set to release an app for iOS users as well. The app which will be released on the App. Good news for iOS users: Xbox Remote Play is out of beta, and now available! Not to be confused with the anticipated Xbox Cloud Gaming which, while still in beta, was released in September only for Android devices as iOS users probably won’t see Xbox Cloud Gaming for some time.

1. Xbox Remote Play Ios
2. Xbox App Remote Play Ios
3. Xbox One Remote Play Ios
4. Steam Remote Play Ios

You can now play PlayStation 4 games on your iPhone with Sony’s official PS4 Remote Play app! You’ve been able to stream games for years with the unofficial R-Play app, but we’re happy to see official support from Sony itself. And for free!

PS4 Remote Play allows you to stream your games from your PlayStation 4 to your iOS devices over Wi-Fi. Using touch controls, you can play games away from your TV. Free at App Store How to fix PS4 Remote Play problems with the iPad.

Just don’t get the impression that this is a replacement for your actual PS4. Yes, it lets you control games straight through your iPhone, but it’s essentially a streaming service that merely beams the games that are playing on your PS4 to your iPhone. The iPhone doesn’t host the games themselves as you might expect from a Nintendo Switch, so if you don’t have a stellar Wi-Fi signal, you’re gonna have a bad time.

But still! PS4 games on an iPhone! The possibilities are, well, limited! Because of the inevitable latency involved and issues with button mapping, Remote Play is best used for turn-based games or “walking simulators” rather than games demanding fast responses like Apex Legends. Even so, it’s a cool option to have and it costs nothing to set up if you want to try it out.

What do you need?

• A PlayStation 4 running running Sony’s 6.50 firmware or higher. You’ll get the best quality with a PlayStation Pro
• An iPhone running at least iOS 12.1
• The PS4 Remote Play app installed from the App Store
• (Optional) An MFi controller such as the Rotor Riot, the SteelSeries Nimbus, or the Gamevice

How to set up Remote Play between your PS4 and iPhone

1. On your iPhone, install the PS4 Remote Play app from the App Store.
2. Turn on your PS4 and log into the desired account. If you need to update your PS4 to the latest firmware, you can do so by scrolling to Settings on your PS4 and then selecting System Software Update.
3. Make sure your iPhone and PS4 are on the same Wi-Fi network.
4. Open the PS4 Remote Play app. Head to the Settings gear in the upper right and log in to your PlayStation Network account. Once you’ve done that, go back to the main screen and hit the big blue Start button. The app will look for your console.
5. If it fails to connect (and it likely will if you’re you’re on an older PS4), you’ll see a prompt in the app asking for a code that will allow you connect the devices manually. On the PS4, go to Settings > Remote Play Connection Settings > Add Devices, where you’ll then see the code. You’ll have 300 seconds to enter the eight-digit code on your phone before it disappears.
6. Tap the white space of the app to make the keypad go away, then click Register in the lower right.
7. You’re in! You’ll immediately see an overlay resembling the buttons of a DualShock 4 controller. A brief tutorial shows how to use the digital thumbstick buttons. You can use Remote Play in either landscape mode or portrait mode. Your fingers don’t obscure the screen in portrait mode, but the streamed screen itself is much smaller.
8. If you want Remote Play to connect to the PS4 even when it’s in rest mode, go to Settings > Power Save Settings > Set Features Available in Rest Mode and then hit Enable Turning on PS4 from Network.
9. To quit using Remote Play, simply leave the app. Since you’ll lose a connection every time you leave the app, you’ll need to hit Start to reconnect every time. Fortunately, it’ll be easier on future attempts.

Optional (but not really): Connect an MFi controller

You can’t use a Sony DualShock 4 controller with your iPhone, but MFi (made for iPhone) controllers like the Rotor Riot, the SteelSeries Nimbus, or the Gamevice make for decent alternatives. It’s usually very easy to hook one up, as I demonstrate here. Once you’ve paired an MFi controller, the digital DualShock 4 button overlay in the Remote Play app should automatically disappear.

Keep in mind that the button schemes for MFi controllers don’t always perfectly align with those on the DualShock 4. On the Gamevice, for example, you can’t press down on either of the two thumbsticks (usually known as the L3 and R3 buttons). That means you won’t be able to use either the sprint or the enemy lock-on in God of War, which makes gameplay unnecessarily difficult. The Rotor Riot is reportedly the only controller that supports L3 and R3, but I haven’t had a chance to try it out.

You’ll also have latency issues when using an MFi controller, much as you will with using Remote Play in general. This means that Remote Play isn’t ideal for games requiring rapid reaction times. You wouldn’t want it for playing Apex Legends, in other words, but it’s fine for turn-based games or lightly interactive games like Persona 5.

Things to keep in mind

• If your Wi-Fi isn’t strong enough to support the stream, you can adjust the video quality in the Remote Play app’s settings (accessible only from the screen where you click Start when you open it). You can choose between four settings, although the best two—720p and 1080p—are only available if you’re using the PlayStation 4 Pro.
• You will lose connection to the game you’re playing every time you leave the PS4 Remote Play on your app.
• PS4 Remote Play will drop its connection if you interact with the physical DualShock 4 on your PS4.
• PS4 Remote Play will drop its connection if you turn off your PS4.
• The PS4 and the iPhone running PS4 Remote Play need to be on the same Wi-Fi network. Playing over LTE doesn’t work.
• You can’t use a Sony DualShock 4 with the PlayStation 4. It’d make all this easier if you could, but I don’t make the rules.

Applies to: Windows 10, Windows 8.1, Windows Server 2019, Windows Server 2016, Windows Server 2012 R2

You can use the Remote Desktop client for iOS to work with Windows apps, resources, and desktops from your iOS device (iPhones and iPads).

Use the following information to get started. Be sure to check out the FAQ if you have any questions.

Note

• Curious about the new releases for the iOS client? Check out What's new for Remote Desktop on iOS?.
• The iOS client supports devices running iOS 6.x and newer.

Get the Remote Desktop client and start using it

This section will tell you how to download and set up the Remote Desktop client for iOS.

Download the Remote Desktop client from the iOS store

First you'll need to download the client and configure your PC to connect to remote resources.

To download the client:

1. Download the Microsoft Remote Desktop client from the iOS App Store or iTunes.
2. Set up your PC to accept remote connections.

Add a PC

After you've downloaded the client and configured your PC to accept remote connections, it's time to actually add a PC.

To add a PC:

1. In the Connection Center, tap +, then tap Add PC.
2. Enter the following information:
   • PC name – the name of the computer. The PC name can be a Windows computer name, an Internet domain name, or an IP address. You can also append port information to the PC name (for example, MyDesktop:3389 or 10.0.0.1:3389).
   • User name – The user name you'll use to access the remote PC. You can use the following formats: user_name, domainuser_name, or user_name@domain.com. You can also select Ask when required to be prompted for a user name and password when necessary.
3. You can also set the following additional options:
   • Friendly name (optional) – An easy-to-remember name for the PC you're connecting to. You can use any string, but if you don't specify a friendly name, the PC name is displayed instead.
   • Gateway (optional) – The Remote Desktop gateway that you want to use to connect to virtual desktops, RemoteApp programs, and session-based desktops on an internal corporate network. Get the information about the gateway from your system administrator.
   • Sound – Select the device to use for audio during your remote session. You can choose to play sound on the local devices, the remote device, or not at all.
   • Swap mouse buttons – Whenever a mouse gesture would send a command with the left mouse button, it sends the same command with the right mouse button instead. Swapping mouse buttons is necessary if the remote PC is configured for left-handed mouse mode.
   • Admin Mode - Connect to an administration session on a server running Windows Server 2003 or later.
   • Clipboard - Choose whether to redirect text and images in your clipboard to your PC.
   • Storage - Choose whether to redirect storage to your PC.
4. Tap Save.

Need to edit these settings? Press and hold the desktop you want to edit, then tap the settings icon.

Add a workspace

To get a list of managed resources you can access on your iOS, add a workspace by subscribing to the feed provided by your admin.

To add a workspace:

1. On the Connection Center screen, tap +, and then tap Add workspace.
2. In the Feed URL field, enter the URL for the feed you want to add. This URL can be either a URL or an email address.
   • If you use a URL, use the one your admin gave you.
     • This URL is usually a Windows Virtual Desktop URL. Which one you use depends on which version of Windows Virtual Desktop you're using.
       • For Windows Virtual Desktop (classic), use https://rdweb.wvd.microsoft.com/api/feeddiscovery/webfeeddiscovery.aspx.
       • For Windows Virtual Desktop, use https://rdweb.wvd.microsoft.com/api/arm/feeddiscovery.
   • If you use an email address, enter your email address. Entering your email address tells the client ot search for a URL associated with your email address if your admin configured the server that way.
3. Tap Next.
4. Provide your credentials when prompted.
   • For User name, give the user name of an account with permission to access resources.
   • For Password, give the password for the account.
   • You may also be prompted to give additional information depending on the settings your admin configured authentication with.
5. Tap Save.

After you've finished, the Connection Center should display the remote resources.

Once subscribed to a feed, the feed content will update automatically on a regular basis. Resources may be added, changed, or removed based on changes made by your administrator.

Manage your user accounts

When you connect to a PC or workspace, you can save the user accounts to select from again.

To create a new user account:

1. In the Connection Center, tap Settings, and then tap User Accounts.
2. Tap Add User Account.
3. Enter the following information:
   • User Name - The name of the user to save for use with a remote connection. You can enter the user name in any of the following formats: user_name, domainuser_name, or user_name@domain.com.
   • Password - The password for the user you specified.
4. Tap Save.

To delete a user account:

1. In the Connection Center, tap Settings, and then tap User Accounts.
2. Select the account you would like to delete.
3. Tap Delete.

Connect to an RD Gateway to access internal assets

A Remote Desktop Gateway (RD Gateway) lets you connect to a remote computer on a corporate network from anywhere on the Internet. You can create and manage your gateways using the Remote Desktop client.

To set up a new gateway:

1. In the Connection Center, tap Settings > Gateways.
2. Tap Add gateway.
3. Enter the following information:
   • Gateway name – The name of the computer you want to use as a gateway. The gateway name can be a Windows computer name, an Internet domain name, or an IP address. You can also add port information to the server name (for example, RDGateway:443 or 10.0.0.1:443).
   • User name - The user name and password to be used for the Remote Desktop gateway you're connecting to. You can also select Use connection credentials to use the same user name and password that you used for the remote desktop connection.

Navigate the Remote Desktop session

This section describes tools you can use to help navigate your Remote Desktop session.

Start a Remote Desktop connection

1. Tap the remote desktop connection to start the remote desktop session.
2. If you're asked to verify the certificate for the remote desktop, tap Accept. To accept by default, set Don't ask me again for connections to this computer to On.

Connection bar

The connection bar gives you access to additional navigation controls.

• Pan Control: The pan control enables the screen to be enlarged and moved around. Pan control is only available using direct touch.
  • To enable or disable the pan control, tap the pan icon in the connection bar to display the pan control. The screen will zoom in while the pan control is active. the pan icon in the connection bar again to hide the control and return the screen to its original resolution.
  • To use the pan control, tap and hold the pan control. While holding, drag your fingers in the direction you want to move the screen.
  • To move the pan control, double-tap and hold the pan control to move the control on the screen.
• Connection name: The current connection name is displayed. Tap the connection name to display the session selection bar.
• Keyboard: Tap the keyboard icon to display or hide the keyboard. The pan control is displayed automatically when the keyboard is displayed.
• Move the connection bar: Tap and hold the connection bar. While holding the bar, drag it over to its new location. Let go of the bar to place it at the new location.

Session selection

You can have multiple connections open to different PCs at the same time. Tap the connection bar to display the session selection bar on the left-hand side of the screen. The session selection bar enables you to view your open connections and switch between them.

Here's what you can do with the session selection bar:

• To switch between apps in an open remote resource session, tap the expander menu and choose an app from the list.
• Tap Start New to start a new session, then choose a session from the list of available sessions.
• Tap the X icon on the left side of the session tile to disconnect from your session.

Command bar

The command bar replaced the Utility bar starting in version 8.0.1. You can use the command bar to switch between mouse modes and return to the connection center.

Use touch gestures and mouse modes in a remote session

The client uses standard touch gestures. You can also use touch gestures to replicate mouse actions on the remote desktop. The mouse modes available are defined in the table below.

Xbox Remote Play Ios

Note

In Windows 8 or later, the native touch gestures are supported in Direct Touch mode. For more information on Windows 8 gestures, see Touch: Swipe, tap, and beyond.

Supported input devices

The client has Bluetooth mouse support for iOS 13 and iPadOS as an accessibility feature. You can use Swiftpoint GT or ProPoint mice for deeper mouse integration. The client also supports external keyboards that are compatible with iOS and iPadOS.

For more information about device support, see What's new in the iOS client and the iOS App Store.

Tip

Swiftpoint is offering an exclusive discount on the ProPoint mouse for iOS client users.

Xbox App Remote Play Ios

Use a keyboard in a remote session

You can use either an on-screen keyboard or physical keyboard in your remote session.

For on-screen keyboards, use the button on the right edge of the bar above the keyboard to switch between the standard and additional keyboard.

If Bluetooth is enabled on your iOS device, the client automatically detects the Bluetooth keyboard.

While certain key combinations might not work as expected in a remote session, many of the common Windows key combinations, such as CTRL+C, CTRL+V, and ALT+TAB will work.

Xbox One Remote Play Ios

Tip

Steam Remote Play Ios

Questions and comments are always welcome. However, if you post support requests or product feedback in this article's comments section, we won't be able to respond to your feedback. If you need help or want to troubleshoot your client, we highly recommend you go to the Remote Desktop client forum and start a new thread. If you have a feature suggestion, you can tell us using the Client UserVoice forum.